CHIPPING AND MULCHING
(02) 3813 8862
Get a Quote
Call Us (02) 3813 8862
Using our fleet of machines, we can clear large areas of vegetation safely and efficiently. We’ll ensure that no stumps are left in the ground or green waste is left behind. We can clear trees close to powerlines and along fence lines to prevent them from creating safety hazards. Where there are invasive plants, we can provide herbicide application services for weed control.
We can also perform tree-specific clearing, removing single trees while leaving the surrounding vegetation untouched. Tree lopping to remove problematic branches while leaving trees and vegetation standing is another one of our capabilities. We also regularly provide land clearing for bushfire mitigation. We can create fire breaks and fire trails by strategically clearing sections of bushfire-prone vegetation.
We have a 20-horsepower mini articulated loader fitted with a log grab. It is used to load chippers with tree waste.
This is an 11-tonne Hino Tipper truck fitted with a custom made wood chipper body with a capacity of 19 cubic metres.
Our 174 horsepower Vermeer wood chipper is capable of processing logs up to 19 inches in diameter.
Here are some of the projects that East Coast Veg Management have contributed our services to over the last few years.
This project involved land clearing along roadsides and fence lines as part of the enabling works for the construction of Western Sydney International Airport at Badgerys Creek.
This project involved clearing vegetation from 330kv and 11kv power lines at Kangaroo Valley, New South Wales. Most of this work was performed on Sydney Catchment Authority land. The work included mulching, hand felling, chipping, tree lopping, and herbicide application to cut stumps.
We removed 500 storm-damaged trees along the Pacific Highway, New England Highway, and Newcastle Link Road.
This project involved lopping overhanging limbs from trees on the Pacific Highway.
On this job, we removed 5000 trees from the median strip on the Pacific Highway at Taree.
Here, we removed 118 hollow-bearing trees from the Queanbeyan Bypass Project area. This work was carried out with 2 consulting ecologists on site to ensure minimal damage to the local environment and ecosystem.
This project involved removing trees for the Gowrie Bridge replacement on the New England Highway, Singleton.
This project involved hand-clearing and mulching trees and vegetation to install a new Asset Protection Zone beside private residences in Werakata National Park, New South Wales.
We constructed a new fire trail to enable access for National Park personnel and vehicles to safely carry out Hazard Reduction Burns at Wolombi, New South Wales.
This project involved tree lopping and removing dangerous trees from camping grounds and picnic areas in the Watagan National Park.
Our staff have worked together for over 15 years, and all members have experience at managerial or supervisory levels of the industry. Because of this, they all have an innate understanding of each other’s strengths and how to work together safely and efficiently. We value and encourage open communication and idea sharing between team members, because we believe that it helps greatly to achieve the best results on every project.
We have a comprehensive safety management system and a commitment to zero harm. Employees and contractors are responsible for their own safety and the safety of those with whom they work. They are accountable for:
ECVM have a comprehensive environmental management system. Our primary aim is to ensure minimal adverse effects to the environment as a result of our work. To achieve this, we ensure the:
The documented procedures and processes identified in ECVM’s environmental management system address ECVM’s environmental obligations, and also ensure uniform control of them. Work instructions specifically deal with environmental issues and the accepted methods of dealing with any environmental risks for both staff and other parties.
We also have a rubber tracked mulching machine.
This is a steel tracked mulching machine.
We are based in Wakefield, New South Wales and work regularly at locations across New South Wales, Victoria, Queensland, and the Australian Capital Territory. Places we can service include:
Can’t see your location? Not to worry. ECVM can work all across the east coast of Australia depending on the size and duration of the project. Contact us today to find out whether we can help you on your next job.
ECVM provides industry-leading services for governmental and commercial land clearing and vegetation management projects across the east coast of Australia. To find out if we can service your next project, contact our team today. Call us or use our online contact form.
380 Miller Rd Wakefield NSW 2278
Use Our Contact Form
Get a free quote by filling out the online form below or speak with a member of our team now by calling (02) 3813 8862.